

The monitor comes with the U-Shaped Bracket

The monitor comes with the U-Shaped Bracket

A suction bracket,a fan bracket or a butterfly bracket can be purchased as an optional extra by Clicking on the "Monitor Bracket" Tab.
Reversing cameras with audio are ideal for towing a caravan, allowing drivers to hear guiding instructions while viewing the area behind. This combination of visual and auditory feedback ensures safer, more precise reversing, especially in tight spaces.

5pcs LEDs -Approx. 5m-10m if there is no other light source.
A 130° viewing angle will provide a horizontal wide angle-view from one rear corner to the other and is wide enough to show three lanes on a highway. This angle is classed as a fisheye field of view backup camera. Its purpose is to provide a wide-angle view to enhance vehicle reversing safety. The angle will show objects close and will have a distorted field of view on objects further away.
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS Electronics cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS Electronics monitors have the 4-pin male ended connection and require the female ended extension cable.

| Kit Includes |
| • 1 x RV-HDMSD5 Car 5inch HD IPS Display Reverse Monitor |
| • 1 x CHDFV140Au 1/3" HD 1080P reverse Number Plate Camera 140° |
| • 1 x 8m Cable |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • Monitor Supports Two Cameras, Additional Camera can be Added in the Future |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.


Monitor Harness

The green trigger cables does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.



Monitor U-bracket Installation

Accessories

5" Revering Camera Monitor (RV-HDMSD5) |
| • 5-inch AHD digital IPS Screen (With Removable Sun Visor) |
| • Resolution: 800 x 3(R.G.B) x 480 |
| • View Angle: Hor.L/ (70) R (70) Ver.UP (50) Down(70) |
| • Back Light: LED, 500cd/m² |
| • Image Reversion: Up/Down and Left/Right |
| • Compatible System: NTCS & PAL Automatically |
| • 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) |
| • 1 Channel AHD Audio Input : Channel 2 |
| • One Trigger Cable - Does not need to be connected wrap in insulation tap. |
| • Power Requirement: DC12V-24V input, 12V output |
| • Accessories: Remote Control, Power Supply Harness, Sun Visor |
| • Remote Control (Battery Not Included) |
| • U Type Bracket (Fan and Suction Brackets Optional) |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • Outer Dimension:140(W) X 102(H) X 26(56) (T) mm |
| • One Year Warranty |
Camera Dimensions 




1080P HD Number Plate Camera Model: CHDFV140Au |
| • Wide Viewing Angle: 140° |
| • Microphone |
| • Waterproof Housing: IP68 |
| • Aluminum Alloy Housing |
| • Night Vision Distance: Approx.: 5m-10m 5 Infrared Lights |
| • Image Device: 1/3 SC2336 AHD 1080P |
| • Effective Pixels: 1928 (H) x 1088 (V) |
| • Sensing Area: 2.7μm |
| • Sync. System: Internal |
| • Resolution: 130W |
| • TV System: PAL |
| • Minimum Illumination: 0.1 Lux (day), 0 Lux (with IR) |
| • Video Output: 1.0 Vp-p/75 Ohm |
| • Scanning System: interlace |
| • AGC: AUTO |
| • Signal to Noise Ratio: Better than 48dB |
| • White Balance: AUTO |
| • Gamma Consumption: 0.45 |
| • Electronic Shutter: AUTO |
| • Backlight Compensation: Auto |
| • Current Consumption: DC 12V |
| • Lens: 1.98mm |
| • Current Drain: 81±5mA |
| • Cable Length on Camera Approx. 500mm |
| • Operating Temperature: -20℃-70℃,RH 95% MAX |
| • Store Temperature: -30℃-80℃,RH 95% MAX |
| • One Year Warranty |